This plugin hasn’t been tested with the latest 3 major releases of WordPress. It may no longer be maintained or supported and may have compatibility issues when used with more recent versions of WordPress.

Live Blogging

تفصیل

To see this plugin in use, it’s probably easiest to watch this screencast.

Live Blogging is a plugin developed to support blogs that are doing live micro
blogging of running events, such as major sport events or tech conferences.
(such as the Roses sporting tournament
at the University of York).

Using WordPress 3.0’s custom post types, the plugin allows you to create these
micro blog entries in a stripped down version of the normal post edit screen.
These micro blog entries then get included in a post which has been activated
as the microblog.

By default, the plugin uses AJAX polling to allow your readers to instantly
update what they are viewing, including any new comments posted on the post. For
professional bloggers, Meteor is supported, which gives the smoothest updating
experience for your viewers and also significantly reduces the load on your
server.

Additionally, the plugin also supports integration with Twitter – if activated,
the first 139 characters of each live blog entry will be posted to Twitter when
they are made.

Using this plugin will give you an advantage over your competitors if you’re
blogging from live events – your readers will get updates quicker, and it will
integrate into your blog better than competing systems, such as CoverItLive.

Credits

Internationalisation

  • Chinese language: Haoxian Zeng
  • Persian language: Rasoul Moshrefizadeh
  • Lithuanian language: Vincent G from http://www.host1free.com/

انسٹال کرݨ

Live Blogging v2, like version 1, requires PHP version 5.2 and WordPress 3.0 or
later. Please make sure you have these before you attempt to use the plugin.
If you get errors whilst activating, it is likely that you are using a version
of PHP before version 5.2.

Live Blogging is installed and activated as per normal plugins. Once it has been
activated, please read the FAQ about how to use it.

Once you have installed Live Blogging, then it is most sensible to proceed to
the Live Blogging settings, which is included in your ‘Settings’ panel in the
admin area as ‘Live Blogging’. From here, you can enable functionality such as
posting to Twitter, changing the method used for live blog updating and
customising the style of the live blog entries.

If you have installed a Meteor server and intend to use it to stream updates,
you must also enter your Meteor server details and set the live blog update
method to ‘Stream using Meteor’.

ہرہک دے سوال

How do I start live blogging?

The very first thing you need to do is select a post which to use as the shell
for your live blog. Either create a new post, or select an existing one to edit,
and then to the right of your post screen, there should be an option entitled:
“Enable live blogging on this post”. Without this option being enabled, you
will be unable to add new live blog entries to this post!

The final step is very important. You must insert the shortcode [liveblog]
somewhere within your post which indicates where the liveblog is to appear.

Now, your live blog is set up! You can select ‘Add New’ from the sidebar under
‘Live Blog Entries’, choose the live blog you want the update to apply to from
the list in the sidebar, and then create your entry as per usual.

Once you have finished with your live blog, untick the “Enable live blogging on
this post” box. This will stop automatic updating and any new updates to be
added to the live blog, but will preserve any existing live blogging
entries for posterity.

How do I upgrade my live blogs from version 1.x of the plugin?

If the plugin detects that old data from the plugin exists, then it will prompt
you to upgrade on the options screen. Also, a ‘Live Blogging Migration’ option
will exist under the Tools menu. Run that tool and follow the prompts to upgrade
all your old entries to the new version.

Please note that live blogs created in previous versions of the software can
not have new entries added to them.

Please note that it is recommended that you disable posting to Twitter when
running a migration, as the migration will cause all legacy entries to be
posted to Twitter.

If I change the time on a live blog entry to appear in the past, then it doesn’t appear in the right order during automatic updating?

Unfortunately this is a limitation on the system – any new entries must appear
at the top of the live blog. Readers who come in after the blog was posted, or
users who subsequentally refresh will see the blog posts in the correct order.

I’m using TwentyTen and comment updating doesn’t look right

Add:

add_filter('live_blogging_build_comments', 'twentyten_liveblogging_comments');
function twentyten_liveblogging_comments($a)
{
    $a['callback'] = 'twentyten_comment';
    return $a;
}

to your functions.php in your theme.

Comment updating does not appear to work on my theme

For comment updating to work, you must be using a reasonably standard comment
setup. That is, your theme must generate comments using wp_list_comments and
put them in an element with an ID of commentlist. If your theme does not do
these things, it is recommended that you disable comment updating in the option
panel.

If your theme does support this, but comment updating still does not work
correctly, it is possible that your theme is calling wp_list_comments with
non-default arguments. It is possible to account for this using a filter.

Using the live_blogging_build_comments filter, you can return the arguments
which your theme uses to call to wp_list_comments to get the same effect as
your default theme. For an example of how to do this, see above.

I imported my live blog from version 1 of the software, and am continuing to use the same live blog, but comment auto-updating isn’t working?

Sorry, this is a design issue with the software. It is recommended that you do
not re-use any imported live blogs in this way.

What is Meteor, and how do I use it?

Meteor is a streaming web server that allows you to instantly “push” updates out
to your readers. This is the technology Twitterfall uses, and the advice of the
Twitterfall creators was useful in developing this functionality. Using Meteor
allows you to lower your server load, as well as quicker updates for your
readers.

There is a catch, however. Meteor is a web server separate to what servers your
normal website and requires special configuration to set up, and your own server
or VPS to run it on. Shared hosting is, typically, unsuitable.

If you are a professional blogger, running your blog from a server where you
can install things as root, and are wishing to reduce server load, using the
plugin with Meteor is highly recommended.

For more about Meteor, please see the Meteor website.

Does deleting a post from inside WordPress also delete it from Twitter?

Yes, it does!

Editing a post does not change the tweet the software generated

It is impossible to edit tweets. A decision was made not to implement this
functionality, as it may result in out-of-order or duplicate tweets in a user’s
timeline. If you really need to delete a tweet, it is recommended that you
either delete the tweet manually, or delete the post and create a new one.

Can I get an RSS feed containing just my live blog entries?

Yes – if permalinks are enabled. Navigate to: WP-URL/feed/?post_type=liveblog_entry&liveblog=ID
where WP-URL is the address of your WordPress site, and replace ID (right
at the end) with the ID of the post containing that live blog.

I’m getting multiple bookmarking icons or similar on every live blog post

Some bookmarking plugins work by adding their icons at the end of every post.
Obviously, when you’re microblogging and adding multiple entries per page, this
can get very tiresome. The options screen allows you to workaround this.

In ‘Advanced Settings’ at the bottom is a list of actions which are unhooked
from the the_content display filter, so they do not show up. To hide a
bookmarking plugin, you must add the name of the function which is called by the
the_content filter to this list. The green + allows you to add more text
boxes, and then red – allows you to remove a function from being unhooked.

Can I add a hashtag to my tweets?

Sure! Just create a custom field on the post/page which contains the live blog
called ‘liveblogging_hashtag’ and it will be appended to all of your tweets.

(Note that this custom field should not contain the # character, that will be
added automatically)

AJAX updating doesn’t work with multi-site and domain mapping

This forum topic (https://wordpress.org/support/topic/ajax-in-subsite) should
resolve the issue for you.

ریویو

سارے 6 ریویو پڑھو

Contributors & Developers

“Live Blogging” is open source software. The following people have contributed to this plugin.

حصہ پاوݨ آلے

“Live Blogging&#8221 دا آپݨی زبان وچ ترجمہ کرو۔

ڈیویلپمنٹ وچ دلچسپی ہے؟

Browse the code, check out the SVN repository, or subscribe to the development log by RSS.

تبدیلی لاگ

2.2.6

  • Imported tweets now correctly format the tweet ID as used in author e-mails/URLs
  • Fixed regression where live blog specific RSS feeds no longer work (thanks to Jin Choi)
  • Stopped trashed/spammed imported mentions from being re-imported
  • Added Lithuanian translation
  • Now use minified JavaScript

2.2.5

  • Remove notice caused by uninitialised variable
  • Fix bug where post ID global is incorrectly set to the ID of the last live
    blog entry instead of the parent post after The Loop.

2.2.4

  • Fix regression where parent post details are filled in in the new entry screen

2.2.3

  • Missed part of the fix in 2.2.2, so fully fixed it now (thanks Biranit)

2.2.2

  • Change how the live blog entries sub-loop is iterated in order to fix
    auto-embedding (thanks to Biranit on the WordPress forum for the bug report and suggested fix)

2.2.1

Thanks to Danny Herran for the following bug fix:

  • Fixed a bug affecting the polling update method

Thanks to STDestiny, jason_coleman and kcristiano at WordCamp Philly for the following feature:

  • You can now add a hashtag to your tweets by setting a custom field on the
    parent post.

2.2

  • Added support for WordPress 3.2

The following features comes thanks to a patch from Gabriel Koen and Corey Gilmore.

  • Added a new ‘timed’ update method, which refreshes the whole page
  • Update the admin experience
  • Twitter comment updating now only works when Twitter posting is enabled

2.1.7

  • Changed Twitter OAuth tokens

2.1.6

  • Some small fixes to form accessibility
  • Correct ellipsis Unicode encoding that was stopping long entries being posted
    to Twitter

2.1.5

  • Add support for embedding live blogs on pages
  • Add Persian translation by Rasoul Moshrefizadeh

2.1.4

  • Offset imported tweets as comments dates with the configured GMT offset
  • Import tweets to comments now uses the default approval status for comments as
    configured in your normal WordPress install

2.1.3

  • Add Chinese translation by Haoxian Zeng

2.1.2

  • Add scheduled Twitter job when upgrading
  • Correctly parse date from tweets when importing comments

2.1.1

  • Don’t generate a warning when the_title filter gets called with only one
    argument – simply disable processing of the title in this case (this should
    only affect plugins doing things in an old-fashioned way).

2.1

  • Allow for new live blog updates to appear in ascending or descending order.
  • Import @replies to live blog tweets as comments to the live blog.
  • Allow the plugin to be loaded if the PHP CURL extension isn’t (although
    Twitter will be disabled).
  • After publishing a new entry, return to the new entry screen, rather than the
    edit screen.

2.0

  • Almost complete rewrite
  • Allow updating via AJAX polling
  • Supports Twitter OAuth
  • Finally kills the timezone bug
  • New admin area user experience
  • Customisable style
  • Customisable timestamp format
  • i18n support
  • Workarounds for unruly plugins in the admin area
  • Supports deleting live blog entries

1.3

  • Fix timezone bugs in certain PHP/WordPress combinations

1.2

  • Correctly require jQuery